This week,Summer and I became a team. And we decided to make a shinning star for the Electronic Paper& origami Project.
1 We researched different sizes and designs of the pyramid shapes. Then decide to make a clean but 3D star.
2 Then we printed out the pyramid model and cut off the star shape. Glue the different part together to make a star shape.
3 Put the battery on the middle of the backside and find the best position to glue it.
4 Try several ways to connect the light and the battery, then find the best way and connect it.
5Created a switch with the copper tape.
6 After make sure everything works well inside of the star. We started to connect the outside part…
7 Before we glue the front side back side together. We made little angel patterns on the front side, so the light will come through.
8 Make sure leave a part of the copper tape outside. And buy pull the copper tape in and out we got a switch on and off button.
8 Then by pull the copper tape in you will turn on the light. We have a shinning star!
9 HERE WE ARE A SHINNING STAR…